Apex Mass Flow Meter 100 sccm
Product Description
Apex Mass Flow Meter can measure 30 gases. One gas should be specified for the primary gas calibration. A 115V/60Hz power cable is available to power the unit.
The Apex Mass Flow Meter can be set via the 0-5V, 0-10V or 4-20 mamp(Special Order).
For the end user, flows can be read via the on-board display. FlowVision Software can be purchased for using a computer to record and graph the flows. The gas selection can also be made from the computer.
For use with a system, a 6 ft. cable(DC-61) or a 25 ft. cable(DC-251) can be purchased in the communication cable section. One end is the 9 pin Din connector to connect to the Apex MFC, while the other end are blank wires.
With any questions, contact us at 770-479-7138 for assistance.
The Apex Mass Flow Meter can be set via the 0-5V, 0-10V or 4-20 mamp(Special Order).
For the end user, flows can be read via the on-board display. FlowVision Software can be purchased for using a computer to record and graph the flows. The gas selection can also be made from the computer.
For use with a system, a 6 ft. cable(DC-61) or a 25 ft. cable(DC-251) can be purchased in the communication cable section. One end is the 9 pin Din connector to connect to the Apex MFC, while the other end are blank wires.
With any questions, contact us at 770-479-7138 for assistance.
Accessories
Universal Power Supply for Apex and Alicat Scientific Mass Flow Controllers, Pressure Controllers and Meters. Universal Plugs for worldwide voltages are provided. $55.00 |
